RAZOR 320 AC/DC Welder

$3,915.00
No reviews yet Write a Review
SKU:
KUMJRRW320ACDC

RAZOR TIG 320 AC/DC Welder

The RAZOR™ 320 AC/DC gives you maximum control over High-Frequency AC/DC TIG welding for incredible results from start to finish. This Three-Phase machine features Square, Trapezoidal and Sine AC output waveforms, as well as MIX ARC AC/DC functions.

The RAZOR™ 320 AC/DC is a complete and professional TIG/STICK welding machine that is ideal for all high-end aluminium, stainless steel fabrication, marine and industrial engineering welding situations.

The all-new ARC TORCHOLOGY T3 TIG Torch comes standard with the RAZOR™ 320 AC/DC, offering up to 30% better power-to-weight ratio and longer consumable lifecycles. A Remote Foot Control and Water Cooler can also be plugged into the machine for even more versatility and power.

Package Includes:

  • RAZOR™ 320 AC/DC TIG Welder
  • 4m High Performance T3 TIG Torch
  • 4m Twist Lock Electrode Holder
  • 500 Amp Earth Clamp & Lead
  • Argon Flowmeter Regulator
  • 2m Gas Hose Complete with fittings
  • Operating Manual

Additional Items:

RAZOR 320 AC/DC TIG Welder Water CoolerRAZOR 320 AC/DC TIG Welder Water Cooler & Trolley

The RAZOR™ 320 AC/DC Water Cooler is the perfect accessory to this high quality machine. The RAZOR™ 320 Water Cooler is perfect for maximising TIG welding performance, especially at high amperages. When combined with the T3W Water-Cooled TIG Torch, Bi-Flow™ Technology is utilised – high capacity cooling chambers remove excessive heat at source, allowing greater performance from the TIG Torch

Features:

THREE-PHASE

  • 415V POWER

MIX ARC AC/DC

  • COMBINES EFFICIENCY OF AC WITH PENETRATION OF DC

WATER COOLER & TROLLEY AVAILABLE

  • EXTRA POWER, PERFORMANCE AND MOBILITY

AC TIG WAVEFORMS

  • INCLUDING SQUARE, TRAPEZOIDAL AND SINE

 

AC TIG Welding:

Featuring multiple AC output waveforms of Square, Trapezoidal and Sine, combined with AC Balance and AC Frequency control you have the ultimate tool in AC TIG Welding mode to suit all your AC TIG welding requirements.

DC TIG Welding

Latest 43KHz inverter frequency technology provides the ultimate in smooth and stable arc condition for DC TIG welding mode, coupled with the Digital Weld Sequence Program provides complete and professional DC TIG Welding function.

MIX ARC AC/DC TIG Welding

This function of MIX AC/DC makes it possible to modulate the welding current, alternating a period of TIG AC with a period of TIG DC-. This means that the efficiency of AC TIG welding can be combined with the high penetration of DC TIG welding, obtaining higher welding speeds and establishing the weld puddle quicker on cold work-pieces. The operator adjustable parameter is the percentage of AC waveform compared to DC- waveform over the entire period, which can be varied from 5~95%.

Stick Welding

Full attention is given to MMA welding providing both DC and AC output modes. Ignition AMP and Ignition Time provide for an operator-controlled Hot Start of the weld by applying extra current to the set weld current over a preset time. Arc force allows adjustment of the arc transfer from a digging action through to a softer layering effect. The complete and professional MMA function allows you to set the ideal arc condition no matter what the electrode and welding situation.

Weld Sequence Control

The Digital Weld Sequence Program and intelligent MCU software provide full TIG functionality in AC, DC and MIX modes. Adjustable pre-sets include Pre-Gas time, Start Current, Up Slope, Down Slope, Finish Current level and Post-Gas time. Digital Pulse parameter presets include Peak & Base current; Pulse Frequency & Pulse Width. HF and Lift Arc Ignition.

Torch Mode

Multiple torch trigger selections of 2T, 2S, 4T, 4S provide complete flexibility and operator control over the weld sequence from start to finish.

Foot Control

This machine supports the connection of an external foot control for extra versatility and convenience while welding. This allows you to adjust your amperage hands-free to avoid disrupting your torch movement.

Job Memory

The job memory function allows you to enter and store weld parameter settings under job numbers. The job number can be recalled to reveal and use the weld parameters stored, and weld parameters can be further adjusted and stored as required. A total of 50 Jobs can be memorised and stored for recall.

Water Cooler Compatible

Activating the water cooler control allows for the water cooler to operate when welding current is available during welding and will switch off automatically after 5 minutes of no welding current.

PRIMARY INPUT VOLTAGE:
415V Three Phase
SUPPLY PLUG:
No plug supplied (20 AMP Recommended)
RATED INPUT POWER (kVA):
9.0
Ieff (A):
10.0
RATED OUTPUT:
5-315A
NO LOAD VOLTAGE (V):
9-73
PROTECTION CLASS:
IP21S
INSULATION CLASS:
F
POWER FACTOR:
0.7
MINIMUM GENERATOR (kVA):
10.0
DINSE CONNECTOR:
35/50
STANDARD:
AS/NZ60974-1, AS/NZ60974-10
SUITABLE MATERIAL:
Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium
WARRANTY:
3 Years
TIG WELDING CURRENT RANGE:
5-315A
TIG DUTY CYCLE @ 40°C:
30% @ 315A
TIG WELDING THICKNESS RANGE:
1-16mm
STICK WELDING CURRENT RANGE:
10-270A
STICK DUTY CYCLE @ 40°C:
30% @ 270A
STICK ELECTRODE RANGE:
2.5-4.0mm
STICK WELDING THICKNESS RANGE:
2-16mm
ARC FORCE:
0-40
DIMENSIONS (mm):
566x223.5x405mm
WEIGHT (kg):
25.5kg
VRD:
Yes
FOOT CONTROL CONNECTION:
UTJRFC-4
CRATER CURRENT CONTROL:
Yes
THERMAL OVERLOAD PROTECTION:
Over Temperature Warning